I-DISEN RTP Controller DS-RTP-4L-01
Ukunikezwa Amandla
• I-Voltage +5 Vdc (+4.4 ukuya +5.25 Vdc) • I-100 mA yangoku, +5 Usetyenziso lwamandla e-Vdc 0.2 W. • Ubuncinane bobonelelo lwamandla lwangoku ngama-300 mA. • Unikezelo lwamandla ombane kunye nezandi zengxolo zingaphantsi kwe-1MHZ, ixabiso lepeak-to-peak liyafuneka libe lincinci.
ngaphezu kwe-100 mV (pp), i-frequency iphezulu kune-1MHZ, ixabiso le-peak-to-peak kufuneka libe ngaphantsi kwe-50 mV (pp).
Ujongano
• Ukuxhasa unxibelelwano lwe-USB. • I-USB
• Iyahambelana ne-USB 1.1, i-USB2.0 izixhobo zesantya esipheleleyo. • Inkxaso yokunqumamisa kunye nokuvuka kude
Imo yokusebenza
• Idesktop
• Umgca
• Iqhosha
Ixesha lokuphendula
• 240pps
Uthotho lweprothokholi yonxibelelwano • UTCP: Miyo USB,l • MTTM: MT410TM/510TM
• I-EloTM: I-SmartSetTM
Ukuthembeka
• Isiseko esithembekileyo, i-MTBF ivavanywe kwiqondo lobushushu le-25 degrees kwindawo enkulu kuneeyure ezingama-300,000
Ubushushu
• Ubushushu bokusebenza: -20°C ukuya kuma-70°C
• Ubushushu bokugcina: -40°C ukuya kuma-85°C
Ukufuma
• Ubumanzi bokusebenza obungagxininisiyo: 10% ukuya kwi-90% RH, • Ukufuma okungagxininisi kwindawo yokugcina: 10% ukuya kwi-90% RH, Ukothuka kunye nokungcangcazela
•Indlela-ntathu ye-sine vibration, 50 Hz ukuya ku-2kHz, 1 G, 2 imizuzu/Octave
ESD
• Ngokutsho kwe-EN 6100-4-2 1995: i-4-point connection 8kV discharge, 15kV air discharge. Ukutsha
• I-PCB kunye nenqanaba lesihlanganisi 94V0. Imilinganiselo
Ulwakhiwo
• Uyilo lwe-PCB olunemigangatho emi-2 enesiseko esijikelezileyo ukucinezela uphazamiseko lwe-EMI. Ubungakanani
• ububanzi: 20mm
• Ubude: 69mm
• Ubude: 8.3 mm
• Yonke imingxuma yokugxumeka isekelwe phantsi.
1.Ukukhanyaingenziwa ngokwezifiso, ukukhanya kunokufikelela kwi-1000nits.
2.Ujonganoingenziwa ngokwezifiso, i-Interfaces TTL RGB, MPI, LVDS, SPI, eDP iyafumaneka.
3.Display's view angleingenziwa ngokwezifiso, i-angle epheleleyo kunye ne-angle yokujonga inxenye iyafumaneka.
4.Iphaneli yokuTouchinokwenziwa ngokwezifiso, umboniso wethu we-LCD unokuba ne-custom resistive touch kunye ne-capacitive touch panel.
5.Isisombululo seBhodi yePCBinokwenziwa ngokwezifiso, umboniso wethu weLCD unokuxhasa ngebhodi yokulawula ngeHDMI, ujongano lweVGA.
6.Isabelo esikhethekileyo LCDingenziwa ngokwezifiso, njengebha, isikwere kunye nomboniso we-LCD ongqukuva unokwenziwa ngokwezifiso okanye nawuphi na umboniso okhethekileyo owenziwe ngokwesiko.
Ukwenziwa ngokwezifiso kweLCM
Ukucofa iPaneli yoLungiso
PCB Board / AD Board Customization
ISO9001,IATF16949,ISO13485,ISO14001,High-Tech Enterprise
Q1. Luthini uluhlu lwemveliso yakho?
I-A1: Sineminyaka eyi-10 yamava okwenza i-TFT LCD kunye nesikrini sokuchukumisa.
►0.96" ukuya kwi-32" TFT LCD Imodyuli;
►Ukukhanya okuphezulu ngokwesiko lephaneli yeLCD;
►Ibha yohlobo lwescreen seLCD ukuya kuthi ga kwi 48 intshi;
►Isikrini sokuchukumisa esinamandla ukuya kuthi ga kwi-65";
►4 iingcingo ezi-5 zesikrini sokuchukumisa;
►Isisombululo esinenyathelo elinye i-TFT LCD idityaniswa nescreen sokucofa.
Q2: Ngaba ungenza i-LCD okanye isikrini sokuchukumisa kum?
A2: Ewe sinokubonelela ngeenkonzo ezilungele zonke iintlobo zesikrini se-LCD kunye nephaneli yokuchukumisa.
►Ukubonisa i-LCD, ukukhanya kwe-backlight kunye nentambo ye-FPC inokwenziwa ngokwezifiso;
►Kwisikrini sokuchukumisa, sinokwenza ipaneli yokuchukumisa yonke njengombala, imilo, ubukhulu bekhava njalo njalo ngokwemfuno yomthengi.
Ixabiso le-►NRE liya kubuyiselwa emva kokuba inani lilonke lifikelele kwi-5K pcs.
Q3. Zeziphi izicelo ezisetyenziswa kakhulu iimveliso zakho?
►Isistim yamashishini, inkqubo yezonyango, iSmart home, inkqubo ye-intercom, inkqubo edibeneyo, iimoto kunye njl.
Q4. Lithini ixesha lokuhambisa?
►Ukulungiselela iisampulu, malunga neeveki ezi-1 ukuya kwezi-2;
►Kwi-odolo ezininzi, malunga neeveki ezi-4-6.
Q5. Ngaba ubonelela ngeesampulu zasimahla?
►Okokuqala intsebenziswano, iisampulu ziya kubizwa, isixa-mali siya kubuyiselwa kwinqanaba lokuodola ngobuninzi.
►Ekubambisaneni rhoqo, iisampulu zisimahla.Abathengisi bagcina ilungelo lalo naluphi na utshintsho.
Njengomvelisi we-LCD we-TFT, singenisa iglasi yomama kwiimpawu ezibandakanya i-BOE, i-INNOLUX, kunye ne-HANSTAR, i-Century njl., emva koko sisike sancinci kwindlu, ukuze sidibane ne-backlight ye-LCD eveliswe endlwini nge-semi-automatic kunye nezixhobo ezizenzekelayo ngokupheleleyo. Ezo nkqubo ziqulethe i-COF (i-chip-on-glass), i-FOG (Flex kwi-Glass) ukudibanisa, ukuyila kwe-Backlight kunye nemveliso, ukuyila kunye nokuveliswa kwe-FPC. Ke iinjineli zethu ezinamava ziyakwazi ukwenza ngokwesiko abalinganiswa besikrini se-TFT LCD ngokwemfuno zabathengi, imilo yepaneli ye-LCD inokwenza ngokwesiko ukuba unokuhlawula umrhumo weglasi yeglasi, sinokwenza ukukhanya okuphezulu kwe-TFT LCD, intambo yeFlex, i-Interface, ngokucofa kwaye ibhodi yokulawula zonke ziyafumaneka.