I-China 4.0 I-Inch ye-intshi ngokuzinzileyo i-Ultra ebanzi ye-stenth Square SCT SCT SCT SCT SCT ye-TFD I-TCD yoMboniso kunye nomzi-mveliso

I-4.0 I-intshi ngokuzinzileyo i-Ultra ebanzi ye-stenth Square Screen Tft I-TFD ye-TFD

I-4.0 I-Inch ngokwezifiso ezenziwe ngobuchule i-Ultra ebanzi ye-steredch screen lcd ye-Tft ye-Tft ye-TFD ye-TFD ibonisa umfanekiso obonisiweyo

Inkcazo emfutshane:

►mudule No.ode040Boe40N-008

►UYA: 4.0nch

► 480X484ts

►Display Mode: Ngokwesiqhelo emnyama

►IAVECAL ENCLE: 80/80/80/80 (U / D / L / R)

►Interface: 12c

►URBIRINGERN (i-CD / M²): 450

►kontathu: 900: 1

►Ukuckich screen: Ngaphandle kwescreen so toca

Thumela i-imeyile kuthi

Iinkcukacha zemveliso

Inzuzo yethu

Iimpawu zeMveliso

I-DS040Beo40n-008 yi-4.0nch eqhelekileyo kwimodi yokubonisa i-4, isebenza kwi-4,0 ye-Tft-LCD ye-TFT-LCD ye-TFD ye-TFD-LCD ye-TFD ye-TFD. efuna ipaneli ephezulu yeflethi, eyona mpembelelo ilungileyo yemodyuli.

Izibonelelo zethu

1.Ukuzonwabisa kunokwenziwa ngokwezifiso, ukukhanya kunokuba yi-1000nenits.

2.UTerterface inokwenziwa ngokwezifiso, i-quidiyo TTL RGB, MVI, LVD, iSPI, EDP iyafumaneka.

I-CELLAY ye-Angle inokwenziwa ngokwezifiso, i-angle epheleleyo kunye ne-Angle i-Angle ifumaneka.

Iphaneli ye-4Touch inokwenziwa ngokwezifiso, umboniso wethu we-LCD unokuba kunye nephaneli yokuchukumisa kunye nemeko yokuchukumisa.

I-5. 5.PCB yeBhodi yeBhodi inokwenziwa ngokwezifiso, umboniso wethu we-LCD unokuxhasa ngebhodi yolawulo kunye ne-HDMI, VGA ye-in vga.

6.Uba isabelo se-LCD sinokwenziwa ngokwezifiso, njengebha, umboniso we-LCD ojikelezileyo unokwenziwa ngokwezifiso okanye nayiphi na enye indlela ebonakalayo ebonakalayo ifumaneka kwisiko.

I-parameter yemveliso

Into	Amaxabiso asemgangathweni
Ubungakanani	4.0intshi
Isisombululo	480x480
Ubungakanani bobukhulu	74.8(W) x76.6(H) x2.1(D)mm
Indawo yokubonisa	71.86(W) × ×70.18(H)mm
Imowudi yokubonisa	Ngokwesiqhelo mnyama
Uqwalaselo lwePixel	I-RGB STRIPE
I-LCM LUMINN	45I-0cd / m2
Umlinganiso womlinganiso	900: 1
Isinxibelelanisi sokukhangela	I-3SPI + RGB
Amanani e-LED	8I-LEDS
Iqondo lokusebenza	'-20 ~ ~ +70 ℃
Iqondo lokugcina	'-30 ~ +80 ℃
I-1. Iphaneli yokuchukumisa i-Contrescreen / iBhodi yeCapccire yeCawa / yeDemo iyafumaneka
I-2. I-Bonding yomoya kunye ne-bill ye-Optical yamkelekile

Eyona ratings iphezulu

Into	Isimboli	Ixabiso	Iyunithi
Umbane woNxibelelwano	Vdd	I-0.3~ 3.6	V
I-Plowlity voltage	I-vin	Vd +I-0.3	V
Iqondo lokusebenza	Testr	-20ukuya kuma-70	℃
Iqondo lokugcina	Tstg	-30ukuya kwi-80	℃

Iimpawu zombane

1-Isebenza iimeko:

Iparameter	Isimboli	Imiz	Tyhu	Max	Iyunithi	Vavanyo imeko
I-Voltage eSebenzayo	VDD	2.8	3.3	3.6	V
Hambisa okwangoku	Idd			50	mA	Vd = 2.8v, Ta = 25OC
I-Plowlity voltage	VIH	0.8vdd	-	Vdd	V
I-Plowlity voltage	Vil	0		I-0.2VDD	V
Igalelo lokuvuza okwangoku	Il	-1.0	-	1.0	uA	Vin = vdd okanye i-vss

2-Ukuqhuba isibane sasemva:

Into	Isimboli	Imiz	Tyhu	Max	Iyunithi	Intetho
Thumela okwangoku	IF	-	40	45	mA
I-voltage phambili	VF	-	12.8	-	V
Indlela yoqhagamshelo			I-4s2p	-
Inombolo ye-LED			8		IiPC

Imizobo ye-LCD

❤ I-DACHEAHEET YETYENZISELWE IMALI YABASEBENZI! Nxibelelana nathi ngeposi.❤

Isicelo

Isiqinisekiso

I-TFT LCD yendibano

Indibano yePaneli yePaneli

FAQ

I-Q1. Ithini iMveliso yakho?

I-A1: Sineminyaka eli-10 yamava e-Tft ye-Tft ye-LCD ye-LCD kunye nescreen sokuchukumisa.

►0.96 "ukuya kwi-32" TFT LCD Mody;

►Ukuqinisekisa ukuqaqamba kwepaneli ye-LCD yesiko;

Uhlobo lwe-►BAR CORT SCIR Turce ukuya kwi-Inch 48 intshi;

►Ukuskrini ukuchukumisa isikrini ukuya kwi-65 ";

►4 ucingo 5 ucingo lokunganyangeki

►ff-inyathelo-isisombululo se-tft i-LCD ye-LCD Screen.

I-Q2: Ngaba ungayinika isiko le-LCD okanye uchukumiso kum?

A2: Ewe sinokubonelela ngeenkonzo zezezifiso kuzo zonke iintlobo zekrini ze-LCD kunye nephaneli yokuchukumisa.

►Ukudityaniswa kwe-LCD bonisa, ukukhanya kwelitha ngasemva kunye nentambo ye-FPC inokwenziwa ngokwezifiso;

►Ukusa isikrini sokuchukumisa, sinokuyixhasa yonke iphaneli yokuchukumisa efana nombala, ubume, ugubungela ubungqingqwa kunye nemfuno yomthengi.

Iindleko ziya kubuyiselwa emva kokuba inani lilonke lifikelela kwi-5k PCS.

Q3. Zeziphi izicelo iimveliso zakho zisetyenziselwa?

I-windipusts System, inkqubo yezonyango, ikhaya elinobulumko, inkqubo ye-Intercom, inkqubo engenisiweyo, inqwelo-mafutha kwaye njl njl.

I-Q4. Lithini ixesha lokuhanjiswa?

►uqule iisampuli, imalunga ne-1 mp3;

►foras Imiyalezo emininzi, imalunga ne-4-6weeks.

I-Q5. Ngaba unika iisampulu zasimahla?

►Ukujongana nexesha lokuqala, iisampulu ziya kuhlawuliswa, imali iya kubuyiselwa kwinqanaba loku-odola.

►I-intsebenziswano rhoqo, iisampulu zikhululekile.ngabaxhasi bagcina ilungelo lotshintsho.

Ngaphambili: I-4.0 I-Inch ngokwezifiso ezenziwe ngobunye i-Ultra Star I-TIT LCD Screen Tft LCD

Okulandelayo: I-7.0 intshi i-intshi i-intshi

Njengomvelisi we-TFT LCD, singenisa iglasi yamama kubandakanya i-boe, i-infenlux, kunye ne-HARTE YENDLU IBANGO, UKUTHENGA IXESHA LE-LCD luvelise ukukhanya kwe-LCD nge-semi-ngokuzenzekelayo. Ezo nkqubo zine-cof (iglasi ye-chip-kwiglasi), inkungu (i-FOG kwiglasi) ihlanganisene, uyilo lwelitha ngasemva kunye nemveliso, uyilo lwe-FPC kunye nemveliso. Ke iinjineli zethu ezinamava zinokwazi ukulungisa oonobumba besikrini se-TFT ye-TFT ngokomsebenzi we-TIT, i-LCD ye-LCD inakho ukuhlawula i-mask ye-GEMB, sinokuqaqambisa i-TFF, intambo ye-flex, i-Clex, eClec, i-Clex, i-Interch kunye IBhodi yoLawulo yonke iyafumaneka.