China 3.71 intshi ultra ebanzi strentsh bard LCD bar screen Umbala TFT LCD Bonisa Manufacturer kunye Factory

I-3.71 intshi ye-ultra ebanzi yokwelula ibhadi ye-LCD yebar yesikrini Umbala we-TFT LCD Bonisa

I-3.71 intshi ye-ultra ebanzi yokwelula ibha yesikrini se-LCD Umbala we-TFT LCD Umboniso obonakalayo

Inkcazelo emfutshane:

►Inombolo yeModyuli:DS0371BOE40N-001
►Ubungakanani: 3.71inch
►Isisombululo:240x960dots
►Imowudi yokuBonisa: Ngokuqhelekileyo iMnyama
►Iengile yokujonga:85/85/85/85(U/D/L/R)
►Ujongano:MIPI/40PIN
►Ukukhanya(cd/m²):350
►Uthelekiso lweRatiyo:1000:1
►Isikrini sokuchukumisa: Ngaphandle kwesikrini sokuchukumisa

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Inzuzo Yethu

Iithegi zeMveliso

I-DS0371BOE40N-001 yimowudi yokubonisa eyi-3.71inch eqhelekileyo emnyama, isebenza ku-3.71” umbala wephaneli ye-TFT-LCD. Iphaneli ye-3.71inch yombala we-TFT-LCD yenzelwe ilebhile yombane, isixhobo zonyango, indlu emhlophe, ikhaya elihlakaniphile, isixhobo sezixhobo zoshishino kunye ezinye iimveliso ze-elektroniki ezifuna umgangatho ophezulu wepaneli yepaneli yokubonisa, umphumo obalaseleyo obonakalayo.Le modyuli ilandela i-RoHS.

UBULUNGELO LWETHU

1.Ukukhanya kunokwenziwa ngokwezifiso, ukukhanya kunokufikelela kwi-1000nits.

I-2.Interface ingenziwa ngokwezifiso, i-Interfaces TTL RGB, i-MIPI, i-LVDS, i-SPI, i-eDP iyafumaneka.

3.I-angle yokubonisa i-Display ingenziwa ngokwezifiso, i-angle epheleleyo kunye ne-angle yokujonga i-partial iyafumaneka.

Iphaneli ye-4.Touch ingenziwa ngokwezifiso, umboniso wethu we-LCD unokuba ne-custom resistive touch kunye ne-capacitive touch panel.

Isisombululo seBhodi ye-5.PCB sinokulungiswa, umboniso wethu we-LCD unokuxhasa ngebhodi yokulawula nge-HDMI, ujongano lweVGA.

I-6.Isabelo esikhethekileyo i-LCD ingenziwa ngokwezifiso, njengebha, isikwere kunye nomboniso we-LCD ojikelezileyo unokwenziwa ngokwezifiso okanye nayiphi na enye imbonakalo ekhethekileyo ekhoyo ngokusesikweni.

IIPARAMETHA ZEMVELISO

Into	Iinqobo ezisemgangathweni
Ubungakanani	3.71intshi
Isigqibo	240x960
Ubungakanani boMda	25.3(W) x98.89(H)x2.1(D)mm
Indawo yokubonisa	22.96(W)×91.44(H)mm
Imo yokubonisa	Ngokuqhelekileyo emnyama
Uqwalaselo lwePixel	RGB imivumbo nkqo
Ukukhanya kweLCM	350cd/m2
Umlinganiselo wokuthelekisa	1000:1
Olona Mkhombandlela wokuJonga	IPS/Iengile epheleleyo
Ujongano	I-MIPI
Amanani e-LED	4ii-LEDs
Ubushushu bokusebenza	'-20 ~ +70℃
Ubushushu boGcino	'-30 ~ +80℃
1. Iphaneli yokuchukumisa i-Resistive touchscreen/capacitive touchscreen/demo board iyafumaneka
2. I-air bonding kunye ne-optical bonding yamkelekile

ABSOLUTE MAXIMUM RATINGS

Into	Uphawu	MIN	MAX	Iyunithi	Phawula
Supply Voltage	VDD	0.3	3.6	V
Igalelo loMbane woMqondiso	Vin	-0.3	VDD+0.3	V
I-Logic Output Voltage	VOUT	-0.3	VDD+0.3	V
Ubushushu bokusebenza	TOPR	-20	70	℃
Ubushushu boGcino	TSTG	-30	80	℃

IIMPAWU ZOMbane

1-Ukusebenza iimeko:

Ipharamitha	Uphawu	MIN	TYP	MAX	Iyunithi	Phawula
I-Voltage yokusebenza	Vcc	2.6	2.8	3.3	V
Unikezelo lwangoku	Idd		30		mA
Igalelo lombane	VIL	0	-	0.2VDD	V
Igalelo lokuvuza okwangoku	IIL	-1	-	1	A

2-Isibane sokuqhuba:

Into	Uphawu	MIN	TYP	MAX	Iyunithi	Phawula
I-LED yangoku	IF	-	20	-	A
I-LED yangoku	IF	-	20	-	A
Ukutya umbane			-	-	mW
Umbane we-LED	VF	-	12	-	V	Qaphela 1
Ixesha loBomi be-LED	WBL	25000		-	Hr	Qaphela 2,3

LCD imizobo

❤ Idata yethu ethile inokubonelelwa! Qhagamshelana nathi ngeposi.❤

Isicelo

Isiqinisekiso

TFT LCD Workshop

IQHINGA LOKUQHUBEKA UMASIFUNDISANE

FAQ

Q1. Luthini uluhlu lwemveliso yakho?

I-A1: Sineminyaka eyi-10 yamava okwenza i-TFT LCD kunye nesikrini sokuchukumisa.

►0.96" ukuya kwi-32" TFT LCD Imodyuli;

►Ukukhanya okuphezulu ngokwesiko lephaneli yeLCD;

►Ibha yohlobo lwescreen seLCD ukuya kuthi ga kwi 48 intshi;

►Isikrini sokuchukumisa esinamandla ukuya kuthi ga kwi-65";

►4 iingcingo ezi-5 zesikrini sokuchukumisa;

►Isisombululo esinenyathelo elinye i-TFT LCD idityaniswa nescreen sokucofa.

Q2: Ngaba ungenza i-LCD okanye isikrini sokuchukumisa kum?

A2: Ewe sinokubonelela ngeenkonzo ezilungele zonke iintlobo zesikrini se-LCD kunye nephaneli yokuchukumisa.

►Ukubonisa i-LCD, ukukhanya kwe-backlight kunye nentambo ye-FPC inokwenziwa ngokwezifiso;

►Kwisikrini sokuchukumisa, sinokwenza ipaneli yokuchukumisa yonke njengombala, imilo, ubukhulu bekhava njalo njalo ngokwemfuno yomthengi.

Ixabiso le-►NRE liya kubuyiselwa emva kokuba inani lilonke lifikelele kwi-5K pcs.

Q3. Zeziphi izicelo ezisetyenziswa kakhulu iimveliso zakho?

►Inkqubo yamashishini, inkqubo yezonyango, iSmart home, inkqubo ye-intercom, inkqubo ebethelelweyo, izithuthi kunye njl.njl.

Q4. Lithini ixesha lokuhambisa?

►Ukulungiselela iisampulu, malunga neeveki ezi-1 ukuya kwezi-2;

►Kwi-odolo ezininzi, malunga neeveki ezi-4-6.

Q5. Ngaba ubonelela ngeesampulu zasimahla?

►Okokuqala intsebenziswano, iisampulu ziya kubizwa, isixa-mali siya kubuyiselwa kwinqanaba lokuodola ngobuninzi.

►Ekubambisaneni rhoqo, iisampulu zisimahla.Abathengisi bagcina ilungelo lalo naluphi na utshintsho.

Ngaphambili: 21.5 intshi CTP Capacitive Touch Screen Panel for TFT LCD Bonisa

Okulandelayo: I-intshi ye-4.2 Eyenziwe ngokwezifiso i-LCD yesikwere isikrini Umbala we-TFT LCD Uboniso

Njengomvelisi we-LCD we-TFT, singenisa iglasi yomama kwiimpawu ezibandakanya i-BOE, i-INNOLUX, kunye ne-HANSTAR, i-Century njl., emva koko sisike sancinci kwindlu, ukuze sidibane ne-backlight ye-LCD eveliswe endlwini nge-semi-automatic kunye nezixhobo ezizenzekelayo ngokupheleleyo. Ezo nkqubo ziqulethe i-COF (i-chip-on-glass), i-FOG (Flex kwi-Glass) ukudibanisa, ukuyila kwe-Backlight kunye nemveliso, ukuyila kunye nokuveliswa kwe-FPC. Ke iinjineli zethu ezinamava ziyakwazi ukwenza ngokwesiko abalinganiswa besikrini se-TFT LCD ngokwemfuno zabathengi, imilo yepaneli ye-LCD inokwenza ngokwesiko ukuba unokuhlawula umrhumo weglasi yeglasi, sinokwenza ukukhanya okuphezulu kwe-TFT LCD, intambo yeFlex, i-Interface, ngokucofa kwaye ibhodi yokulawula zonke ziyafumaneka.