I-China 【I-Tft LCD VIDE】 -21.5 Inch LCD iboniswe- umbala we-Tft - I-Infor ft LCD I-SCT-I-EKDRODER MVIWO NOLWAZI Khupha

I-21.5 intshi 1080 × 1920 ye-Tft ye-Tft ye-TFT ye-LCD

Inkcazo emfutshane:

►module Hayi .: I-DS215Beae30N-001

►Ukuphucula: 21.5 Inch

►boor: 1080x1920

►Display Mode: I-Tft / i-Tft / ihlala iMnyama, iyahanjiswa

►Uku: 85/85/85/85 (U / D / LR)

►Interface: I-LVDS / 30PIN

►URBERORINGERN (i-CD / M²): 600

►kontathu: 1000: 1

►Ukuckich screen: Ngaphandle kwescreen so toca

Thumela i-imeyile kuthi

Iinkcukacha zemveliso

Inzuzo yethu

Iimpawu zeMveliso

I-DS215BOE30N-001 yi-21.5 intshi ye-Inch Tft i-LCD ye-LCD, isebenza ukuya kwi-21.5 ye-TFT-LCD yephaneli. Iphayitha ye-Inch ye-Inch ye-Inch ye-TFT-LCD yenzelwe ikhaya elikrelekrele, isibonisi sangaphandle, isixhobo sezixhobo ezivela kwimizi-mveliso kunye nezinye iimveliso ze-elektroniki ezifuna ipaneli ephezulu yeflethi, eyona nto ilungileyo. Le modyuli ilandela i-rohs.

Izibonelelo zethu

1. Ukuqaqamba kunokwenziwa ngokwezifiso, ukukhanya kunokuba yi-1000nenits.

2. Ujongano lunokwenziwa ngokwezifiso, i-intergs ttl rgb, i-miphi, i-LVDs, i-EDP iyafumaneka.

3. I-Angle yeVidiyo ye-Angle inokwenziwa ngokwezifiso, i-angle epheleleyo kunye ne-Angle yexabiso ifumaneka.

I-4. Umboniso wethu we-LCD unokuba nephaneli yokuchukumisa i-ochasayo kunye ne-camoting toech.

5. Umboniso wethu we-LCD unokuxhasa ngebhodi yolawulo kwi-HDMI, VGA ye-incricary.

I-6. Umboniso we-LCD ojikelezileyo unokwenziwa ngokwezifiso okanye nawuphi na omnye umboniso owodwa obonakalayo ufumaneka kwisiko.

I-parameter yemveliso

Into	Amaxabiso asemgangathweni
Ubungakanani	I-21.5 intshi
Isisombululo	I-1080x1920
Ubungakanani bobukhulu	292.2 (h) x 495.6 (v) x8.0 (D)
Indawo yokubonisa	260.28 (H) x478.656 (v)
Imowudi yokubonisa	Ngokwesiqhelo mhlophe
Uqwalaselo lwePixel	I-RGB Stripepe
I-LCM LUMINN	I-600cd / m2
Umlinganiso womlinganiso	I-1000: 1
Umbono ofanelekileyo	Imbono epheleleyo
Isinxibelelanisi sokukhangela	I-LVDS
Amanani e-LED	136 I-LEDS
Iqondo lokusebenza	'-20 ~ ~ 60 ℃
Iqondo lokugcina	'-50 ~ + 60 ℃
I-1. Iphaneli yokuchukumisa i-Contrescreen / iBhodi yeCapccire yeCawa / yeDemo iyafumaneka
I-2. I-Bonding yomoya kunye ne-bill ye-Optical yamkelekile

Iimpawu zombane

Iparameter		Imiz.	Tyibilika.	UMax.	Iyunithi	Amagqabantshintshi
I-voltagen yokuhambisa amandla	Vdd	4.5	5	5.5	V	Qaphela 1
Igalelo elivumelekileyo i-ripple voltage	Vrf	-	-	I-100	mV	Kwi-vd = 3.3v
Uncedo lwamandla okwangoku	Idd	-	I-500	-	mA	Qaphela 1
Umgangatho wokufakelwa kwenqanaba eliphezulu	Vih	-	-	I-100	mV
Umsebenzi wegalelo eliphantsi lokufaka	Vil	-100	-	-	mV
I-voltage yegalelo eyahlukileyo	I vid i	I-0.2	I-0.4	0.6	V
Umahluko kwimozulu ye-Poomes	I-VCM	0.6	1.2	2.2	V
Ukutya umbane	PD	-	2.5	-	W	Qaphela 1
	-	-	-	-	W
	Ptotal	-	-	-	W

Imizobo ye-LCD

❤ I-DACHEAHEET YETYENZISELWE IMALI YABASEBENZI! Nxibelelana nathi ngeposi.❤

Malunga nomboniso wesiko

Nanini na xa ufuna ukukhetha eyona modyuli ye-LCD-Translarector ye-LCD yezicelo zakho, izinto zabo kufuneka ziqwalaselwe. I-Infon inokwenza ifreyimu yemveliso yakho:

1. Ubungakanani

Ubungakanani bokuqala ukuqwalasela uninzi loyilo okanye usetyenziso oluza kusetyenziswa. Ukukhetha ezimbini zobungakanani kujongwa ukuba bungakanani ubungakanani bendawo kunye nendawo esebenzayo.

2. Ukukhanya

Ukukhanya kwemodyuli ye-LCD yesiko yinto ebalulekileyo ekufuneka ithathelwe ingqalelo kukhetho lwendlela yokwenza isicelo kunye nokusebenza okusebenzayo. Kule, sine-Engle kunye nePropoti eyahlukileyo ephenjelelwa yindawo apho ifumaneka khona kwaye nendlela yokusetyenziswa kwayo.

I-3. Jonga i-angle

I-LCD yesiko ilawula i-engile yokujonga kodwa oku kuhamba kunye nokukhetha ukutshintsha. Umzekelo, indlela yokuphucula indlela yokuphucula iteknoloji ye-IPS ibonelela ngendawo yokujonga i-180.

I-4. Ingqungquthela umyinge

Le yinto ebalulekileyo kwaye ichaza iziphumo zamehlo zesixhobo. Uninzi lwe-LCD yesiko le-LCD liveze kwiimeko eziphakamileyo zokukhanya.

5. Isinxibelelanisi sokukhangela

Iimodyuli ze-Tft ze-TFT zeza ngeendlela ezahlukeneyo ezinamagama ahlukeneyo njenge-LVD, i-RS232, i-HDMI, njl njl.

I-6. Ubushushu

Kukho isayensi yenzululwazi kwinkcazo yoluhlu lobushushu ukuqinisekisa ixesha elide lenkonzo kunye nokusebenza. Kukho iindlela ezininzi ezibekwe kwindawo yokuphucula intsebenzo ye-LCD yesiko.

I-7. Ukudibana komphezulu, isikrini sokuchukumisa, ikhusi le-len, kunye ne-gonlical bond

Kwimarike yanamhlanje, iimveliso ezininzi zikhutshwa yonke imihla kwaye uninzi lwezi mveliso lusetyenziswa ngaphandle. Yiyo loo nto ukuphuculwa okhethiweyo kuye kwaba yinto ebalulekileyo. Ngoku ekubeni sinamacwecwe kunye nee-smartphones, kukho imfuneko enyanzelekileyo yokuba iPhambili iPhambili kunye neNkcazo yabasebenzisi abanobuhlobo.

Isicelo

Isiqinisekiso

I-TFT LCD yendibano

Ngaphambili: 15.6 I-Inch 1920 × 1080 yemigangatho ye-Tft ye-Tft ye-LCD

Okulandelayo: I-3.5 I-Inch 320 × 240 i-Tft tift ye-Tft ye-LCD yoLawulo lwePaneli

Njengomvelisi we-TFT LCD, singenisa iglasi yamama kubandakanya i-boe, i-infenlux, kunye ne-HARTE YENDLU IBANGO, UKUTHENGA IXESHA LE-LCD luvelise ukukhanya kwe-LCD nge-semi-ngokuzenzekelayo. Ezo nkqubo zine-cof (iglasi ye-chip-kwiglasi), inkungu (i-FOG kwiglasi) ihlanganisene, uyilo lwelitha ngasemva kunye nemveliso, uyilo lwe-FPC kunye nemveliso. Ke iinjineli zethu ezinamava zinokwazi ukulungisa oonobumba besikrini se-TFT ye-TFT ngokomsebenzi we-TIT, i-LCD ye-LCD inakho ukuhlawula i-mask ye-GEMB, sinokuqaqambisa i-TFF, intambo ye-flex, i-Clex, eClec, i-Clex, i-Interch kunye IBhodi yoLawulo yonke iyafumaneka.