I-2.1 intshi elungiselelwe i-LCD engqukuva yesikrini yekhaya elihlakaniphile Umbala we-TFT LCD Isiboniso
I-DS021BOE40N-001 yimowudi yokubonisa eyi-2.1inch eqhelekileyo emnyama, isebenza ku-2.1” umbala wephaneli ye-TFT-LCD. Iphaneli ye-2.1inch yombala we-TFT-LCD yenzelwe ilebhile yombane, isixhobo zonyango, indlu emhlophe, i-smart home, isixhobo sezixhobo zoshishino kunye ezinye iimveliso ze-elektroniki ezifuna umgangatho ophezulu wepaneli yepaneli yokubonisa, umphumo obalaseleyo obonakalayo.Le modyuli ilandela i-RoHS.
1.Ukukhanya kunokwenziwa ngokwezifiso, ukukhanya kunokufikelela kwi-1000nits.
I-2.Interface ingenziwa ngokwezifiso, i-Interfaces TTL RGB, i-MIPI, i-LVDS, i-SPI, i-eDP iyafumaneka.
3.I-angle yokubonisa i-Display ingenziwa ngokwezifiso, i-angle epheleleyo kunye ne-angle yokujonga i-partial iyafumaneka.
Iphaneli ye-4.Touch ingenziwa ngokwezifiso, umboniso wethu we-LCD unokuba ne-custom resistive touch kunye ne-capacitive touch panel.
Isisombululo seBhodi ye-5.PCB sinokulungiswa, umboniso wethu we-LCD unokuxhasa ngebhodi yokulawula nge-HDMI, ujongano lweVGA.
I-6.Isabelo esikhethekileyo i-LCD ingenziwa ngokwezifiso, njengebha, isikwere kunye nomboniso we-LCD ojikelezileyo unokwenziwa ngokwezifiso okanye nayiphi na enye imbonakalo ekhethekileyo ekhoyo ngokusesikweni.
Into | Iinqobo ezisemgangathweni |
Ubungakanani | 2.1intshi |
Isigqibo | 480x480 |
Ubungakanani boMda | 56.18(W) x59.71(H)x2.3(D)mm |
Indawo yokubonisa | 53.28(W)×53.28(H)mm |
Imo yokubonisa | Ngokuqhelekileyo emnyama |
Uqwalaselo lwePixel | RGB imivumbo nkqo |
Ukukhanya kweLCM | 300cd/m2 |
Umlinganiselo wokuthelekisa | 900:1 |
Olona Mkhombandlela wokuJonga | Konke |
Ujongano | 0 5 PITCH 40PIN |
Amanani e-LED | 4ii-LEDs |
Ubushushu bokusebenza | '-20 ~ +70℃ |
Ubushushu boGcino | '-30 ~ +80℃ |
Qaphela 1: Isalathiso sokujonga owona mgangatho womfanekiso wahlukile kwinkcazo ye-TFT. Kukho utshintsho lwe-180 degree. |
Into | Uphawu | MIN | MAX | Iyunithi | Phawula |
Umbane wokubonelela ngombane kwingqiqo | VDD | 0.3 | 4.8 | V |
|
Igalelo lombane | Vin | / | VDD+0.3 | V |
|
Ubushushu bokusebenza | TOPR | -20 | 70 | ℃ |
|
Ubushushu boGcino | TSTG | -30 | 80 | ℃ |
|
Qaphela: Qaphela1: Umlinganiselo opheleleyo lixabiso lomda ongaphaya kwe-IC mhlawumbi
yaphukile.
Abaqinisekisi ukusebenza.
Qaphela2: Umbala ongasemva utshintsha kancinci ngokuxhomekeke kubushushu bendawo. Oku
I-Fenomenon iyabuyiswa.
Ta≦70C: 75%RH max
Ta>70C: ukufuma okupheleleyo kufuneka kube ngaphantsi kokufuma kwe-75%RH kwi-70C Qaphela3: I-Ta kwi-30C iyakuba <48hrs, kwi-80 C iya kuba ngaphantsi kwe-120hrs
1-Ukusebenza iimeko:
Ipharamitha | Uphawu | MIN | TYP | MAX | Iyunithi | Phawula |
I-Voltage yokusebenza | Vcc | 2.5 | 2.8 | 4.8 | V |
|
Unikezelo lwangoku | Idd | -- | -- | 50 | mA | VDD=2.8V,Ta=25oC |
Igalelo lombane | VIH | 0.8VDD | - | VDD | V |
|
Igalelo lombane |
| 0 | -- | 0.2VDD | V |
|
Igalelo lokuvuza okwangoku | IIL | -1 | - | 1 | A | VIN=VDD okanye VSS |
Qaphela: I-voltage enkulu kunaphezulu inokuyonakalisa imodyuli.
Onke amandla ombane axelwe xa kuthelekiswa ne-VSS=0V.
2-Isibane sokuqhuba:
Into | Uphawu | MIN | TYP | MAX | Iyunithi | Phawula |
Phambili Ngoku | IF | - | 80 | 88 | A |
|
| ||||||
Phambili iVoltage | VF |
| 3.2 | - | V |
|
Imowudi yoqhagamshelo |
| - | 4Ukuhambelanael | - | V |
|
Inombolo ye-LED | / | - | 4 | - | IiPC |
|
Qaphela1: Ukusebenza kwe-Optical kufuneka kuvavanywe ku-Ta=25C kuphela .Ukuba i-LED iqhutywa ngumgangatho ophezulu wangoku, ubushushu obuphezulu be-ambient kunye nemeko yokufuma. Ixesha lokuphila kwe-LED liya kuncitshiswa. Ubomi bokusebenza buthetha ukuba ukukhanya kuyehla ukuya kuma-50% okukhanya kokuqala. Ixesha eliqhelekileyo lomsebenzi liqikelelwa idatha.
❤ Idata yethu ethile inokubonelelwa! Qhagamshelana nathi ngeposi.❤
I-A1: Sineminyaka eyi-10 yamava okwenza i-TFT LCD kunye nesikrini sokuchukumisa.
►0.96" ukuya kwi-32" TFT LCD Imodyuli;
►Ukukhanya okuphezulu ngokwesiko lephaneli yeLCD;
►Ibha yohlobo lwescreen seLCD ukuya kuthi ga kwi 48 intshi;
►Isikrini sokuchukumisa esinamandla ukuya kuthi ga kwi-65";
►4 iingcingo ezi-5 zesikrini sokuchukumisa;
►Isisombululo esinenyathelo elinye i-TFT LCD idityaniswa nescreen sokucofa.
A2: Ewe sinokubonelela ngeenkonzo ezilungele zonke iintlobo zesikrini se-LCD kunye nephaneli yokuchukumisa.
►Ukubonisa i-LCD, ukukhanya kwe-backlight kunye nentambo ye-FPC inokwenziwa ngokwezifiso;
►Kwisikrini sokuchukumisa, sinokwenza ipaneli yokuchukumisa yonke njengombala, imilo, ubukhulu bekhava njalo njalo ngokwemfuno yomthengi.
Ixabiso le-►NRE liya kubuyiselwa emva kokuba inani lilonke lifikelele kwi-5K pcs.
►Inkqubo yamashishini, inkqubo yezonyango, iSmart home, inkqubo ye-intercom, inkqubo ebethelelweyo, izithuthi kunye njl.njl.
►Ukulungiselela iisampulu, malunga neeveki ezi-1 ukuya kwezi-2;
►Kwi-odolo ezininzi, malunga neeveki ezi-4-6.
►Okokuqala intsebenziswano, iisampulu ziya kubizwa, isixa-mali siya kubuyiselwa kwinqanaba lokuodola ngobuninzi.
►Ekubambisaneni rhoqo, iisampulu zisimahla.Abathengisi bagcina ilungelo lalo naluphi na utshintsho.
Njengomvelisi we-LCD we-TFT, singenisa iglasi yomama kwiimpawu ezibandakanya i-BOE, i-INNOLUX, kunye ne-HANSTAR, i-Century njl., emva koko sisike sancinci kwindlu, ukuze sidibane ne-backlight ye-LCD eveliswe endlwini nge-semi-automatic kunye nezixhobo ezizenzekelayo ngokupheleleyo. Ezo nkqubo ziqulethe i-COF (i-chip-on-glass), i-FOG (Flex kwi-Glass) ukudibanisa, ukuyila kwe-Backlight kunye nemveliso, ukuyila kunye nokuveliswa kwe-FPC. Ke iinjineli zethu ezinamava ziyakwazi ukwenza ngokwesiko abalinganiswa besikrini se-TFT LCD ngokwemfuno zabathengi, imilo yepaneli ye-LCD inokwenza ngokwesiko ukuba unokuhlawula umrhumo weglasi yeglasi, sinokwenza ukukhanya okuphezulu kwe-TFT LCD, intambo yeFlex, i-Interface, ngokucofa kwaye ibhodi yokulawula zonke ziyafumaneka.