13.3 intshi 1920 * 1080 FHD Isiko IPS Umbala oMgangatho TFT LCD Isiboniso seNotebook
I-DS133BOE30N-006 yi-13.3inch eqhelekileyo imowudi yokubonisa emnyama, isebenza kwi-13.3” yombala wephaneli ye-TFT-LCD. Iphaneli ye-13.3inch yombala we-TFT-LCD yenzelwe i-Notebook, i-smart home, isixhobo sesixhobo soshishino kunye nezinye iimveliso zombane ezifuna umgangatho ophezulu wokuboniswa kweepaneli ezisicaba, umphumo obalaseleyo wokubonwayo. Le modyuli ilandela i-RoHS.
1.Ukuqaqamba ingenziwa ngokwezifiso, ukukhanya kunokufikelela kwi-1000nits.
2.Ujonganoingenziwa ngokwezifiso, i-Interfaces TTL RGB, MPI, LVDS, SPI, eDP iyafumaneka.
3.I-engile yokujonga yeDisplayingenziwa ngokwezifiso, i-angle epheleleyo kunye ne-angle yokujonga inxenye iyafumaneka.
4.Iphaneli yokuchukumisainokwenziwa ngokwezifiso, umboniso wethu we-LCD unokuba ne-custom resistive touch kunye ne-capacitive touch panel.
5.PCB Board isisombululoinokwenziwa ngokwezifiso, umboniso wethu weLCD unokuxhasa ngebhodi yokulawula ngeHDMI, ujongano lweVGA.
6.Isabelo esikhethekileyo LCDingenziwa ngokwezifiso, njengebha, isikwere kunye nomboniso we-LCD ongqukuva unokwenziwa ngokwezifiso okanye nawuphi na umboniso okhethekileyo owenziwe ngokwesiko.
Into | Iinqobo ezisemgangathweni |
Ubungakanani | 13.3intshi |
Isigqibo | 1920x1080 |
Ubungakanani boMda | 300.06(H)×177.39(V)×2.7(D) mm |
Indawo yokubonisa | 293.76(H)x165.24(V) mm |
Imo yokubonisa | Ngokuqhelekileyo emnyama |
Uqwalaselo lwePixel | RGB Umgca othe nkqo |
Ukukhanya kweLCM | 250cd/m² |
Umlinganiselo wokuthelekisa | 800:1 |
Olona Mkhombandlela wokuJonga | IPS/Iengile epheleleyo |
Ujongano | I-EDP |
Amanani e-LED | 36LEDs |
Ubushushu bokusebenza | 0℃~50°℃ |
Ubushushu boGcino | -20℃~60℃ |
1. Iphaneli yokuchukumisa i-Resistive touchscreen/capacitive touchscreen/demo board iyafumaneka | |
2. I-air bonding kunye ne-optical bonding yamkelekile |
1-Ukukala koMbane ngokupheleleyo:
Into | Uphawu | Imilinganiselo | Iyunithi | Amanqaku | ||
MIN | TYP | MAX | ||||
Umbane woNgeniso loMbane | VDD | 3.0 | 3.3 | 3.6 | V | Qaphela 1 |
Ubonelelo lwaMandla lwangoku | IDD | - | - | - | mA | |
Ubonelelo lwaMandla oMqhubi we-LED I-Voltage | HVDD | 2.7 |
| 24 | V |
|
Ubonelelo lwaMandla oMqhubi we-LED Okwangoku | IHVDD | - | - | 280 | mA | |
Ukusetyenziswa kwamandla e-LED | I-PLED | - | - | 6.72 | W | |
Igalelo Elilungileyo I-Threshold Voltage | VIT+ | - |
| +100 | mV |
|
Igalelo elibi I-Threshold Voltage | VIT- | -100 |
| - | mV |
2-Isibane sokuqhuba:
Into | Uphawu | Imilinganiselo | Iyunithi | Amagqabantshintshi | |||
MIN | TYP | MAX | |||||
Umbane wobonelelo lwamandla kwi-Backlight | I-VLED | 5 | - | 37 | V |
| |
Unikezelo lwamandla lwangoku loKhathazo lwasemva | ILED | 6 | - | 25 | mA |
| |
Unikezelo lwamandla oMbane | I-PLED | 0.18 | - | 5.55 | W | Qaphela 1 | |
EN Ulawulo Inqanaba | Isibane sasemva sivuliwe | I-VENH | 1.2 |
|
| V | EN logic amandla ombane aphezulu |
Isibane sasemva sicinyiwe | I-VENL |
|
| 0.6 | V | EN logic amandla ombane aphantsi | |
Inqanaba loLawulo lwe-PWM | Inqanaba eliphezulu lePWM | VPML | 1.2 |
| 5.0 | V |
|
Inqanaba eliphantsi lePWM | VPML | 0 |
| 0.6 | V |
| |
PWM Control Frequency | FPWM | 100 | - | 1,600 | KHz |
| |
Ubungakanani bomsebenzi | - | 1 | - | 100 | % |
Ukwenziwa ngokwezifiso kweLCM
Ukucofa iPaneli yoLungiso
PCB Board / AD iBhodi Customization
ISICELO
UMGANGATHO
ISO9001,IATF16949,ISO13485,ISO14001,High-Tech Enterprise
TFT LCD Workshop
IQHINGA LOKUGCINA Iworkshop
FAQ
Q1. Luthini uluhlu lwemveliso yakho?
I-A1: Sineminyaka eyi-10 yamava okwenza i-TFT LCD kunye nesikrini sokuchukumisa.
►0.96" ukuya kwi-32" TFT LCD Imodyuli;
►Ukukhanya okuphezulu ngokwesiko lephaneli yeLCD;
►Ibha yohlobo lwescreen seLCD ukuya kuthi ga kwi 48 intshi;
►Isikrini sokuchukumisa esinamandla ukuya kuthi ga kwi-65";
►4 iingcingo ezi-5 zesikrini sokuchukumisa;
►Isisombululo esinenyathelo elinye i-TFT LCD idityaniswa nescreen sokucofa.
Q2: Ngaba ungenza i-LCD okanye isikrini sokuchukumisa kum?
A2: Ewe sinokubonelela ngeenkonzo ezilungele zonke iintlobo zesikrini se-LCD kunye nephaneli yokuchukumisa.
►Ukubonisa i-LCD, ukukhanya kwe-backlight kunye nentambo ye-FPC inokwenziwa ngokwezifiso;
►Kwisikrini sokuchukumisa, sinokwenza ipaneli yokuchukumisa yonke njengombala, imilo, ubukhulu bekhava njalo njalo ngokwemfuno yomthengi.
Ixabiso le-►NRE liya kubuyiselwa emva kokuba inani lilonke lifikelele kwi-5K pcs.
Q3. Zeziphi izicelo ezisetyenziswa kakhulu iimveliso zakho?
►Isistim yamashishini, inkqubo yezonyango, iSmart home, inkqubo ye-intercom, inkqubo edibeneyo, iimoto kunye njl.
Q4. Lithini ixesha lokuhambisa?
►Ukulungiselela iisampulu, malunga neeveki ezi-1 ukuya kwezi-2;
►Kwi-odolo ezininzi, malunga neeveki ezi-4-6.
Q5. Ngaba ubonelela ngeesampulu zasimahla?
►Okokuqala intsebenziswano, iisampulu ziya kubizwa, isixa-mali siya kubuyiselwa kwinqanaba lokuodola ngobuninzi.
►Ekubambisaneni rhoqo, iisampulu zisimahla.Abathengisi bagcina ilungelo lalo naluphi na utshintsho.
Njengomvelisi we-LCD we-TFT, singenisa iglasi yomama kwiimpawu ezibandakanya i-BOE, i-INNOLUX, kunye ne-HANSTAR, i-Century njl., emva koko sisike sancinci kwindlu, ukuze sidibane ne-backlight ye-LCD eveliswe endlwini nge-semi-automatic kunye nezixhobo ezizenzekelayo ngokupheleleyo. Ezo nkqubo ziqulethe i-COF (i-chip-on-glass), i-FOG (Flex kwi-Glass) ukudibanisa, ukuyila kwe-Backlight kunye nemveliso, ukuyila kunye nokuveliswa kwe-FPC. Ke iinjineli zethu ezinamava ziyakwazi ukwenza ngokwesiko abalinganiswa besikrini se-TFT LCD ngokwemfuno zabathengi, imilo yepaneli ye-LCD inokwenza ngokwesiko ukuba unokuhlawula umrhumo weglasi yeglasi, sinokwenza ukukhanya okuphezulu kwe-TFT LCD, intambo yeFlex, i-Interface, ngokucofa kwaye ibhodi yokulawula zonke ziyafumaneka.