China 1.6 Inch Eltra Standed Stnth Scrent LCD LCD I-KFD SCT STT ye-Tft I-TFD DISTER VIDER NE-STRICT

I-1.6 I-Inch Eltra Standes Stenth I-LCD LCD I-KFD SCT TFT LCD

Inkcazo emfutshane:

►mudule No.odes016boe16n-001
►: 1.6 I-intshi
►bodwa: 400 (ethe tyaba) * 400 (nkqo)
►Display Mode: Ngokwesiqhelo emnyama
►Uku: 85/85/85/85 (U / D / L / R)
►SPEface: QSPI / 16pin
►URBISIRINIST (i-CD / M²): 230
►kontathu: 1000: 1
►Ukuckich screen: Ngaphandle kwescreen so toca

Thumela i-imeyile kuthi

Iinkcukacha zemveliso

Inzuzo yethu

Iimpawu zeMveliso

I-DS016Be16N-001 yi-intshi e-1.6 i-intshi i-Inch molo emnyama, isebenza kwi-1.6 "umbala we-tft-lcd phaneli yenzelwe i-intshi ye-TCFD-LCD ye-intshi ye-Inch. Ezinye iimveliso ze-elektroniki ezifuna ipaneli ephezulu yeflethi, inzala ebalaseleyo yemodyuli ilandela i-rohs.

Izibonelelo zethu

1.Ukuzonwabisa kunokwenziwa ngokwezifiso, ukukhanya kunokuba yi-1000nenits.

2.UTerterface inokwenziwa ngokwezifiso, i-quidiyo TTL RGB, MVI, LVD, iSPI, EDP iyafumaneka.

I-CELLAY ye-Angle inokwenziwa ngokwezifiso, i-angle epheleleyo kunye ne-Angle i-Angle ifumaneka.

Iphaneli ye-4Touch inokwenziwa ngokwezifiso, umboniso wethu we-LCD unokuba kunye nephaneli yokuchukumisa kunye nemeko yokuchukumisa.

I-5. 5.PCB yeBhodi yeBhodi inokwenziwa ngokwezifiso, umboniso wethu we-LCD unokuxhasa ngebhodi yolawulo kunye ne-HDMI, VGA ye-in vga.

6.Uba isabelo se-LCD sinokwenziwa ngokwezifiso, njengebha, umboniso we-LCD ojikelezileyo unokwenziwa ngokwezifiso okanye nayiphi na enye indlela ebonakalayo ebonakalayo ifumaneka kwisiko.

I-parameter yemveliso

Into	Amaxabiso asemgangathweni
Ubungakanani	1.6intshi
Isisombululo	I-400x400
Ubungakanani bobukhulu	42.92(W) x45.87(H) x2.2(D)mm
Indawo yokubonisa	39.840(W) × ×39.840(H)mm
Imowudi yokubonisa	Ngokwesiqhelo mnyama
Uqwalaselo lwePixel	I-RGB STRIPE
I-LCM LUMINN	230I-CD / M2
Umlinganiso womlinganiso	1000: 1
Umbono ofanelekileyo	Ips / i-engle epheleleyo
Isinxibelelanisi sokukhangela	Qpi
Amanani e-LED	2I-LEDS
Iqondo lokusebenza	'-20 ~ ~ +70 ℃
Iqondo lokugcina	'-30 ~ +80 ℃
I-1. Iphaneli yokuchukumisa i-Contrescreen / iBhodi yeCapccire yeCawa / yeDemo iyafumaneka
I-2. I-Bonding yomoya kunye ne-bill ye-Optical yamkelekile

Eyona ratings iphezulu

Into	Isimboli	Imiz	Max	Iyunithi	Intetho
Ukuhambisa i-voltage	Vdd	-I-0.3	5.0	V
I-Volling Voltage	I-vin	-0.3	Vd + 0.3	V
I-Logic Prempige Foltage	Vout	-0.3	Vd + 0.3	V
Iqondo lokusebenza	Testr	-20	70	℃
Iqondo lokugcina	Tstg	-30	80	℃

Iimpawu zombane

1-Isebenza iimeko:

Iparameter	Isimboli	Imiz	Tyhu	Max	Iyunithi	Intetho
I-Voltage eSebenzayo	I-VCC	3	3.3	3.6	V
Umsebenzi wedijithali okwangoku	Icc		16		mA

2-Ukuqhuba isibane sasemva:

Into	Isimboli	Imiz	Tyhu	Max	Iyunithi	Intetho
Ikhokelwa okwangoku	IF	-	40	-	A
Ikhokelwa okwangoku	IF	-	40	-	A
Ukutya umbane			-	-	mW
Ivolthi ye-LED	VF	2.8	3	3.3	V	Qaphela 1
Ixesha lobomi ezi-LED	Wbl	I-25000		-	Hr	QAPHELA 2,3

Qaphela 1: Kukho amaqela ama-2 ekhokelwa

Qaphela 2: Ta = 25c

Inqaku lesi-3: Ukuqaqamba ukuze uncitshiswe kwi-50% yexabiso lokuqala

Imizobo ye-LCD

❤ I-DACHEAHEET YETYENZISELWE IMALI YABASEBENZI! Nxibelelana nathi ngeposi.❤

Isicelo

Isiqinisekiso

I-TFT LCD yendibano

Indibano yePaneli yePaneli

FAQ

I-Q1. Ithini iMveliso yakho?

I-A1: Sineminyaka eli-10 yamava e-Tft ye-Tft ye-LCD ye-LCD kunye nescreen sokuchukumisa.

►0.96 "ukuya kwi-32" TFT LCD Mody;

►Ukuqinisekisa ukuqaqamba kwepaneli ye-LCD yesiko;

Uhlobo lwe-►BAR CORT SCIR Turce ukuya kwi-Inch 48 intshi;

►Ukuskrini ukuchukumisa isikrini ukuya kwi-65 ";

►4 ucingo 5 ucingo lokunganyangeki

►ff-inyathelo-isisombululo se-tft i-LCD ye-LCD Screen.

I-Q2: Ngaba ungayinika isiko le-LCD okanye uchukumiso kum?

A2: Ewe sinokubonelela ngeenkonzo zezezifiso kuzo zonke iintlobo zekrini ze-LCD kunye nephaneli yokuchukumisa.

►Ukudityaniswa kwe-LCD bonisa, ukukhanya kwelitha ngasemva kunye nentambo ye-FPC inokwenziwa ngokwezifiso;

►Ukusa isikrini sokuchukumisa, sinokuyixhasa yonke iphaneli yokuchukumisa efana nombala, ubume, ugubungela ubungqingqwa kunye nemfuno yomthengi.

Iindleko ziya kubuyiselwa emva kokuba inani lilonke lifikelela kwi-5k PCS.

Q3. Zeziphi izicelo iimveliso zakho zisetyenziselwa?

I-windipusts System, inkqubo yezonyango, ikhaya elinobulumko, inkqubo ye-Intercom, inkqubo engenisiweyo, inqwelo-mafutha kwaye njl njl.

I-Q4. Lithini ixesha lokuhanjiswa?

►uqule iisampuli, imalunga ne-1 mp3;

►foras Imiyalezo emininzi, imalunga ne-4-6weeks.

I-Q5. Ngaba unika iisampulu zasimahla?

►Ukujongana nexesha lokuqala, iisampulu ziya kuhlawuliswa, imali iya kubuyiselwa kwinqanaba loku-odola.

►I-intsebenziswano rhoqo, iisampulu zikhululekile.ngabaxhasi bagcina ilungelo lotshintsho.

Ngaphambili: I-1.9 intshi i-intshi

Okulandelayo: I-4.0 i-intshi ngokwesiko elijikeleze i-LCD yesikrini se-Smart Ikhaya le-Smart LCF

Njengomvelisi we-TFT LCD, singenisa iglasi yamama kubandakanya i-boe, i-infenlux, kunye ne-HARTE YENDLU IBANGO, UKUTHENGA IXESHA LE-LCD luvelise ukukhanya kwe-LCD nge-semi-ngokuzenzekelayo. Ezo nkqubo zine-cof (iglasi ye-chip-kwiglasi), inkungu (i-FOG kwiglasi) ihlanganisene, uyilo lwelitha ngasemva kunye nemveliso, uyilo lwe-FPC kunye nemveliso. Ke iinjineli zethu ezinamava zinokwazi ukulungisa oonobumba besikrini se-TFT ye-TFT ngokomsebenzi we-TIT, i-LCD ye-LCD inakho ukuhlawula i-mask ye-GEMB, sinokuqaqambisa i-TFF, intambo ye-flex, i-Clex, eClec, i-Clex, i-Interch kunye IBhodi yoLawulo yonke iyafumaneka.